Samsung AQ 1O0 - Manual (Page 13)

Connecting to a Power Source
You should use the rechargeable battery BP70A supplied with the cam­
era. Be sure to charge the battery before using the camera.
■ BP70A rechargeable battery Specification
Moci^dl BP70A
Lithium Ion
740mAh
Voltage 3.7V
Approximately 150 Minutes
Important information about battery usage.
• When camera is not in use, turn off the power.
• Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
• Low temperatures (below 0°C) can affect the performance
of the battery and you may experience reduced battery life.
• Batteries will usually recover at normal temperatures.
• During extended use of the camera, the camera body may
become warm. This is perfectly normal.
: Numrjer o' mages and rjadery ;‘e: ...Sing tne BP70A
Battery life / ^
Number of images:
Conditions
Still image
i. 90 MIN/
Approx. 180 shots
Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: SOSec.
Changing the zoom position between
the Wide and the Tele after every shot
Using the flash on every second shot
Using the camera for 5 minutes and
then powering it off for 1 minute.
X. 70 MIN
Using the fully charged battery
640x480 image size
30 fps frame rate
if; These figures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
I If you connect the AC adapter to the USB cable, you can use it
as an AC cable and recharge the spare battery with it.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
- Using a USB cable
: Remove the AC adapter.You can
download stored images to your
PC (p.96) or supply the power
to your camera through the USB
cable.