Samsung AQ 1O0 - Manual (Page 17)

Instructions on how to use the memory card
® Be sure to format the memory card (see p.58) if you are using
a newiy purchased memory card for the first time, if it contains
data that the camera cannot recognize, or if it contains images
captured with a different camera.
• Turn off the camera power whenever the memory card is being
inserted or removed.
• Repeated use of the memory card wili eventuaiiy reduce the
memory card’s performance. Shouid this be the case, you wiii
need to purchase a new memory card. Wear and tear on the
memory card is not covered by the Samsung warranty.
• The memory card is an electronic precision device. Do not bend,
drop or subject the memory card to any heavy impact.
• Do not store the memory card in an environment with strong
eiectronic or magnetic fieids, e.g. near ioud speakers or TV
receivers.
• Piease do not use or store in an environment where there are
extremes in temperature.
• Do not allow the memory card to become dirty or to come into
contact with any liquid. Should this happen, clean the memory
card with a soft cioth.
• Piease keep the memory card in its case when not in use.
• During and after periods of extended use, you may notice that the
memory card is warm. This is perfectiy normai.
• Do not use a memory card that is used in another digitai camera.
To use the memory card in this camera, format the memory card
using this camera.
• Do not use a memory card formatted by another digitai camera or
memory card reader.
' The data on the memory card can be corrupted if:
- The memory card is used incorrectiy.
- The power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
' Samsung cannot be heid responsibie for iost data.
> it is advisabie to copy important data onto other media as back-up
e.g. floppy disks, hard disks, CD etc.
> if there is insufficient memory avaiiable :
A [Memory Fuii] message wili appear and the camera wiii not
operate. To optimize the amount of memory in the camera,
replace the memory card or delete unnecessary images stored
on the memory card.
0 ® Don't remove the memory card when the camera status lamp is
blinking as this may cause damage to data in the memory card.