Cabletron Systems 6500 - Manual (Page 46)

2-26 SmartSwitch 6500 User Guide
SmartSwitch ATM Administrator Switch Installation and Setup
Figure 2-11 SmartSwitch ATM Administrator
SmartSwitch ATM Administrator can be installed on a workstation running Windows 95/98, Windows NT, or Solaris
2.4/2.5.
For Windows 95/98 or Windows NT, the following minimum hardware configuration is required:
• Pentium 133 Mhz or faster processor
• CD-ROM drive
• 20 MB free disk space
• 64 MB RAM
• Monitor with resolution of at least 800 x 600 pixels
• Ethernet or ATM network interface card
For Solaris 2.4/2.5, the following hardware configuration is required:
• Ultra-1 Sparc workstation or equivalent
• CD-ROM drive
• 100 MB free disk space
• 64 MB RAM
• 200 MB virtual memory (swap space)