Cabletron Systems 6500 - Manual (Page 41)

SmartSwitch 6500 User Guide 2-21
Switch Installation and Setup Using the Console
2.5.2 Console Commands
Note For detailed descriptions of all console commands, see the SmartSwitch 6500
Reference Manual.
All console commands use the syntax:
operator switch-attribute [ ... ]
Where the operator is one of the following:
activate : Make a connection active.
add ( create ): Add a new instance of a switch-attribute.
backup : Backup the active TSM/CPU configuration.
clear : Clear a table, list, or configuration.
deactivate : Make a connection inactive.
delete ( remove ): Delete an instance of a switch-attribute.
execute : Perform the following action.
exit : Exit the switch console.
flush : Remove assigned values; for example, flush a route table.
modify ( set ): Change the values that currently define a switch-attribute.
show ( display ): Show the current values used by a switch-attribute.
start : Start a process on the switch; for example, start the LAN Emulation Configuration Server.
restart : Restart a process on the switch; for example, restart client .
restore : Restore the TSM/CPU configuration from its backup file.