When the charge lamp flashes – Sony DCR-PC10 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the CHARGE lamp flashes
Check through the following chart.
Remove the battery pack from the AC
power adaptor. Then install the same
battery pack again.
When the CHARGE lamp flashes
When the CHARGE lamp does not
again
flash again
Insfall another battery pack.
If the CHARGE lamp lights up and
goes out after a while, there is no
problem. *
When the CHARGE lamp flashes
When the CHARGE lamp does not
again
flash again
The problem is with the AC power
If the CHARGE lamp lights up and
adaptor.
goes out after a while, the problem is
with the battery pack installed first.
Please contact your nearest Sony dealer
in connection with the product with
the problem.
o
3
■o_
ID
3
If you use a battery pack which you have just bought or which has been left unused for a long time, the CHARGE
lamp may flash at the first charging. This cfoes not indicate a problem. Repeat again to charge with same battery
pack.
103