Cisco 3030 - Manual (Page 4)

Contents
iv
Cisco Catalyst Blade Switch 3030 Hardware Installation Guide
OL-8389-01
Management Options 1-6
Using the Device Manager 1-6
Using the Command-Line Interface 1-7
Using SNMP 1-7
Network Configurations 1-7
C H A P T E R
2 Switch Installation 2-1
Preparing for Installation 2-1
Warnings 2-1
Installation Guidelines 2-3
Verifying Package Contents 2-4
Dell Modular Server Chassis Architecture 2-5
Installing the Switch Module into the Server Chassis 2-6
Configuring the Switch Module 2-7
Connecting through the Switch Module Console Port 2-8
Connecting through the DRAC/MC 2-9
Waiting for POST to Complete 2-11
Completing the Initial Configuration 2-11
Installing and Removing SFP Modules 2-13
Installing SFP Modules into SFP Module Slots 2-14
Removing SFP Modules from SFP Module Slots 2-15
Connecting to the 10/100/1000 Ports 2-16
Connecting to SFP Modules 2-17
Connecting to Fiber-Optic SFP Modules 2-17
Connecting to 1000BASE-T SFP Modules 2-18
Where to Go Next 2-19
C H A P T E R
3 Troubleshooting 3-1
Understanding POST Results 3-1
Diagnosing Problems 3-1
A P P E N D I X
A Technical Specifications A-1
A P P E N D I X
B Connector and Cable Specifications B-1
Connector Specifications B-1
10/100/1000 Ports B-1
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices B-1
Connecting to 1000BASE-T Devices B-2