Sony MDS-501 - Manual (Page 39)

I I'i L*A*J 11 L* ■ kV^*L*J ft.«
(Move Function)
I Notes I
If the following indication lights up
S o r r y
4 ft
ft 7 ft ft tft
«« tt t> «4 «•
1ft tr 1ft
The recorder could not combine the sp>ecified tracks. Extensive
editing of the same track may render it impossible to combine with
another track. This is due to the technical limitation of the MD
system and is not a mechanical error.
If the "Protected" indication lights up
The recorder could not combine the specified tracks because the
record-protect slot on the disc is open. Combine the track after
closing the slot.
When "TOC" flashes in the display window
Do not jog the recorder or pull out the power cord. After the
recorder updates the contents of the recording, ‘TOC" lights up. If
You've made any changes to the MD, 'TOC"lights up. If you press
^ EJECT or POWER at this time, 'TOC" flashes as the actual
contents of the MD are updated.
Use this function to change the order of specific tracks while
the recorder is stopped, plajdng or paused.
After moving a track, track numbers following the new track
position increase by one.
Example: Moving track 3 to track position 5
39