Sony MDS-501 - Manual (Page 23)

Press EDIT/NO.
S e l e c t R E C ?
Restoring the recording mode to its factory setting
Repeat the above procedure, pressing EDIT/NO in step 5 to
change the recording mode to All REC OFF.
If you start recording with All REC ON mode
The recorder erases the entire contents of the MD, then
begins recording from the beginning of the MD. Note,
however, that even a single recording or playback operation
in All REC ON mode changes the mode to All REC OFF until
that MD is ejected, and any new material thereafter is
recorded from the end of the existing material on the MD.
When the MD is ejected, the recording mode returns to All
RECON.
Press YES.
nil REC ?
To erase the entire content of an MD in All REC OFF
mode (factory setting)
Use the erase function on page 34 to erase the contents of
the MD before the start of recording.
I Notes I
•When the power cord is unplugged for a long lime. All REC ON
mode changes to All REC OFF (factory setting), and
"STANDBY" flashes when the recorder is plugged in and turned
on again. If you want to change the recording mode to All REC
ON, select the recording mode again before iixserting an MD into
the recorder.
Press YES.
»Always eject the MD, if loaded, before changing the recording
mode.
Rll REC ON
O
NO DISC
The recording mode changes to All REC ON.
23