Sony MDS-501 - Manual (Page 16)

Playing an MD (Normal Play)
Locating a position within a track (Search)
Jse the search function to quickly scan a track either
arward or backward during playback to locate a specific
losition.
© E ^|l ©
S <9 II1 » 1 • 1 ■ 1
1___1-------------------------------
To forward scan a track
Hold down ►► during playback.
To backward scan a track
Hold down « during playback.
When you release the button, the recorder begins playing
from the position located by scanning.
'o go forward or backward quickly
told down ►► or
« during playback pause. The recorder
cans the disc at 160 times the normal playing speed. Since
lo sound is output at this time, you must keep track of the
lisc location through the information that appears in the
lisplay window.
Note)
'racks that are only a few seconds in length may be too short to scan
ising the search function. For such tracks, it is better to play the MD
lack at normal speed.
Displaying the title and remaining playing
time of a track
Press DISPLAY during playback lo display the title and
remaining playing time of the current track. "No Name"
appears if a track is unlabelcd. To label a recordable disc and
its tracks, see "Labeling Recordings" on page 41.
© l"=?li .
1
®
" 5 ® E 2311 » I • iXI Ein
C______ I —
DISPLAY
Press DISPLAY while playing back a track.
Each press of DISPLAY changes the display in the
following order remaining track playing time -»track
name —* elapsed playing lime
2 02n 33s
2 - 0 1 n 2 5 s
0
H f l P P V
• The display window shows up to 12 characters at a
time. To see a title of 13 characters or more, press
SCROLL on the remote commander.
Press SCROLL again to pause scrolling, and again to
continue scrolling.
• If no title is recorded, "No Name" appears, followed by
the elapsed playing time.
• Each press of DISPLAY while the recorder is stopped
changes the display in the following order;
For premastered discs: Total disc playing time —»
disc name
For recorded discs: Total recorded time —»
remaining disc playing time —*■ disc name
16