Sony MDS-501 - Manual (Page 30)

CD Synchro-Recording
By connecting your MiniDisc recorder to a Sony CD player or Hi-Fi Component
System, you can easily dub CDs onto MDs using the CD synchro buttons on the
remote commander. If your recorder is connected to a Sony CD player by the optional
optical cable through the digital input jack, tracks are automatically recorded in the
same sequence as the original onto the MD regardless of whether "LevelSync ON" or
“Level SyncOFP' is selected. During CD synchro-recording, the recording mode stays
in All REC OFF mode regardless of the recording mode setting, and the recorder
*ecords new material from the end of the existing material.
©
dbg
iri
ISJ og
dp ^p
^p ^p
QjQ
CD do
lai C3 3] C1C3
Set the amplifier function seiector to CD.
With the label side up and the arrow
pointing toward the opening, slide the
recordable MD into the disc compartment
until the unit grips it.
For digital recording, select DIGITAL with
the INPUT selector switch.
M PUT
MMOO OlOlTAt "Tia“
D i e i t a l i n
For analog recording, select ANALOG with
the INPUT selector switch, then set the
REC LEVEL control to the position shown
below.
RECiEVCt
Insert a CD into the CD player.
Select the playback mode (shuffle play,
program play, etc.) on the CD player.
Press STANDBY.
The CD player enters play pause, and MD recorder
enters recording pause.
"REC Ready" alternates with the remaining time on
the disc in the display window.
If recording pause continues for more than ten
minutes, it is automatically canceled and the
recorder stops.
Press START.
The MD recorder starts recording and the CD
player starts playback.
The track number and elapsed recording time of
the track being recorded appear.
4 0 0 n 0 1 s
* I I * goes off.
If the CD player does not start playing
Some CD player models will not start playing
when you press START. Press CD PLAYER/ I I
instead.