Sony MDS-501 - Manual (Page 28)

Recording From the Line (Analog) Input Jack
A n a l o g r e c o r d i n g
To write track numbers during analog recording, see
"Writing Track Numbers While Recording (Track Marking)"
on page 32.
7 93
With the label side up and the an'ow
pointing toward the opening, slide the
recordable MD into the disc compartment
until the unit grips it.
Select ANALOG with the INPUT selector
switch.
INPUT MIM.06 oioffai
P n a l o g i n
3
Press «RECC*).
The recorder enters recording pause,
e««
• If the recording mode is All REC OFF (factory
setting), "REC Ready" will alternate with the
remaining time on the disc in the display
window.
4 R E C R e a d v
^iti
' If you changed the recording mode to All REC
ON, "AllREC Ready" will alternate with the
remaining time on the disc in the display
window.
R l l R E C R e a d u
If recording pause continues for more than ten
minutes, it is automatically canceled and the
recorder stops.
Play the sound source (CD player, cassette
deck, etc.) to be recorded.
While monitoring the sound tiirough the
headphones, adjust the recording level
with the REC LEVEL control (see page 29).
Set the REC LEVEL control to the position show
below when recording from a Sony DAT deck,
CD player or cassette deck.
RfCUVft
Stop the sound source to be recorded.
28