Tomei Powered EXHAUST MANIFOLD - Manual (Page 12)

- 12 -
2. Installation of the TOMEI Exhaust Manifold.
The following instructions are a basic and easy to follow procedure for the general installation. For more
detailed information on the correct torque settings, please refer to the Mitsubishi factory service manual for
the correct bolt torque settings.
【Each bolt & gasket installation chart】
The following illustration is a basic guide on the fitting location of the bolts and gaskets for re-assembly.
⑨ ⑩
⑲（For A/T cars use ⑪）
⑲（For A/T Cars ) ⑧ Exhaust Manifold Gasket use ⑪ ① ⑩
⑦ Turbo Charger Exhaust Gasket
⑩
⑧
⑨
②
⑩ Eye Bolt Gasket
⑧
③
Oil Return Gasket (Turbo Side)
(短ﾎﾞﾙﾄ) ⑧ ④
(Oil Sump Side)) ⑨ Oil Return Gasket
⑳
⑯
⑤
① Turbo Oil Return Gasket
⑳
⑥
Secondary Gasket A
⑰
⑦
Secondary Gasket B ⑧
(For M/T)
⑩ ⑲
⑧ Secondary Gasket B
Washer
⑨
Heat Sheild Bolt ⑭ ⑲ ⑩
［14Nm (1.4kgf-m)]
②
⑮ Blind Bolt ［49Nm (4.9kgf-m)]
③
⑪
⑬
［44N・m (4.4kgf-m)]
［ 9Nm (0.9kgf-m)] ⑫
［10Nm (1.0kgf-m)] ⑬
［14Nm (1.4kgf-m)] ⑭
④ ［17Nm (1.7kgf-m)] ⑮
⑱ ［24Nm (2.4kgf-m)] ⑯
［29Nm (2.9kgf-m)] ⑰
⑱ ⑫ ［36Nm (3.6kgf-m)]
⑤
⑱
［49Nm (4.9kgf-m)] ⑲
⑥ ⑥ ［59Nm (5.9kgf-m)] ⑳
Please apply bolt smooth paste on the nuts and bolts to prevent metal burn or
⑭
the bolts from sticking to the nuts for ease of removal in the future.