Tomei Powered ARMS M8280 - Manual (Page 22)

2-2-2
Install the Water Inlet Hose
2-2-3 Install the Stud Bolt
Install the Stud Bolts to the 5 points on the
Exhaust Housing Outlet & 1 point
(Part ⑥-6) on the Turbo Bracket.
WATER INLET HOSE
・Copper Washer (Part ③-2)
・Banjo (Part ③-3)
・Banjo Bolt (Part ③-1)
・Mesh Hose (Part ③-4)
・Waterline Inlet Adapter (Part ③-5)
Note the orientation
22
Fit the 4 studs to the Exhaust Housing
manifolds 4 bolt (Part ⑥-7) holes.
Attach the stud bolts to the 2 positions
(Part ⑥-8) on the inlet side of the
compressor housing.
※ The short side is the Turbo
side.
※ Use the double nut for
installation.
※ Be careful when removing
the nuts.
Note the orientation
of the stud bolts.
Short Long
22