Compaq MP1200 User Manual
Page 8
1–6
Compaq iPAQ Microportable Projector MP1200 User’s Guide
Getting Started
3
Power/Standby
button
Powers the projector lamp on and off.
The Standby LED changes color
modes to indicate the following
operating modes:
1. Flashing green indicates the
projector is going into standby
mode and cannot be restarted until
the LED glows amber steadily.
2. The LED button rapidly flashing
green indicates the lamp has
automatically shut down due to an
over-temperature event.
3. A steady amber LED indicates the
projector is ready to power-up.
4. A steady green LED indicates the
projector is on and operating
properly.
4
Menu
button
Press this button once to start the
on-screen display menu. Press it
again to save any changes and exit
the menu.
5
Enter/Accept
button
When the on-screen display menu is in
use, performs the following functions:
1. Displays any sub-menus below the
main menu.
2. If pressed after selecting “yes” or
“no” to a question, the request will
be processed and the menu will go
one level higher.
3. If pressed after changing an
adjustment scale, the new
information will be saved and the
menu will go one level higher.
Identifying the Projector Buttons
(Continued)
Item
Symbol
Control
Function
261799-001.book Page 6 Thursday, April 25, 2002 3:13 PM