Compaq MP1200 - Manual (Page 16)

Using the Projector
Compaq iPAQ Microportable Projector MP1200 User’s Guide 2–5
Connecting a Monitor
1. Connect the monitor cable 1 to the VGA-out connector on
the side of the projector.
2. Connect one end of the power cord 2 into the side of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
Powering On the Projector
1. Make sure the power cord and signal cable are securely
connected.
✎
Make sure the projector is perpendicular to the projection screen.
261799-001.book Page 5 Thursday, April 25, 2002 3:13 PM