Compaq MP1200 - Manual (Page 57)

8–2 Compaq iPAQ Microportable Projector MP1200 User’s Guide
Troubleshooting
Scrolling, cut-off, or incorrect
image displayed. 1. Press the Resync button.
2. Turn everything off, then power on
the projector first and power on the
notebook or desktop computer
second.
3. If the above steps do not correct the
display image, adjust the resolution
of the notebook or desktop computer
to 1024 x 768.
4. Access the OSD and ensure the
Zoom mode is set to 1. For more
information on using the OSD, refer
to Chapter 3, “Using the On-Screen
Display Menu.”
Image is flickering or unstable. Press the Resync button on the
projector panel to adjust the tracking. If
that does not stop the flickering, adjust
the Clock Phase function in the Image
Control menu.
Troubleshooting (Continued)
Problem Solutions
261799-001.book Page 2 Thursday, April 25, 2002 3:13 PM