Compaq MP1200 - Manual (Page 40)

Using the Remote Control
Compaq iPAQ Microportable Projector MP1200 User’s Guide 5–3
Follow the instructions in the “Adjusting the On-Screen Display
Menu” section of Chapter 3 to make adjustments to the on-screen
display menu.
Remote Control Functions
The remote control duplicates the functions of the projector
buttons including adjusting the on-screen buttons.
The remote control will work up to 26.25 feet (8.0 meters) from
the projector when pointed directly at the sensor or 19.69 feet
(6.0 meters) at a 30 degree angle from the sensor.
7 Source button Selects the input source
8 On-screen menu
adjustments
+
Adjusts the on-screen display menu up
9 On-screen menu
adjustments
-
Adjusts the on-screen display
menu down
: Top Keystone
Correction button
Increases or decreases keystone
(trapezoidal) distortion at the top of the
screen
; Bottom Keystone
Correction button
Increases or decreases keystone
(trapezoidal) distortion at the bottom of
the screen
; Battery compartment Holds batteries needed for remote
control operation
Identifying the Remote Control Components (Continued)
Item Component Function
261799-001.book Page 3 Thursday, April 25, 2002 3:13 PM