Compaq MP1200 - Manual (Page 58)

Troubleshooting
Compaq iPAQ Microportable Projector MP1200 User’s Guide 8–3
Notebook computer or iPAQ
Pocket PC screen is not displaying
the presentation. Notebook computer:
Most notebook computers have a
monitor loop-through or simultaneous
viewing function. Press the
Fn + F4
function keys on the notebook computer
to switch the image from the notebook
screen to the projection screen or to
toggle through the following three
options:
1. LCD: Output displays only on the
notebook screen.
2. CRT: Output displays only on the
projection screen.
3. CRT/LCD: Output displays on the
notebook screen and the projection
screen.
Activate CRT/LCD “ON” at the same
time. To identify any alternate function
keys to be used, refer to your notebook
computer’s user manual.
Mac PowerBooks:
1. To control video mirroring, click
Control Panel > Display, then set
Video Mirroring to ON for both
internal and external viewing.
2. Set Video Mirroring OFF for image
on external monitor only or internal
only, depending on monitor selection
in Monitors.
Troubleshooting (Continued)
Problem Solutions
261799-001.book Page 3 Thursday, April 25, 2002 3:13 PM