Compaq MP1200 - Manual (Page 48)

6–8 Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the Home Theater Kit
HDTV Modes
The Compaq Microportable Projector is capable of displaying
various High Definition TV (HDTV) display modes. A variety of
sources can be used to provide HDTV data to the projector for
display. Some of these sources are:
■ Digital-VHS (D-VHS) player
■ HDTV-DVD player
■ Satellite Dish HDTV receiver
■ A variety of DTV tuners (to receive programming over the
airwaves)
■ Game stations
Most of these sources will provide an analog component video
output, a standard VGA output, or a standard digital DVI output.
The color information can be either in YPrPb (default) format or
RGB format. The user can switch between these using the
on-screen display menu adjustments by selecting “A/V & HDTV
Control.” Refer to “Introducing the On-Screen Display Menu” in
Chapter 3 for more information.
The projector is capable of processing HDTV data provided
either on the standard VGA connector or the DVI interface. Use
the VGA-to-HDTV/Component video cable that comes with the
optional Home Theater Kit to feed the component outputs to the
VGA input connector.
The following modes are supported on the DVI interface:
■ HD0
❏ 640 x 480p (480 progressive)
❏ 640 x 480i (component video)
❏ 1280 x 720p
■ HD1—1920 x 1080i
261799-001.book Page 8 Thursday, April 25, 2002 3:13 PM