Qmark FRP/FRS - 2 & 3 Element Infrared Heaters - Manual (Page 4)

Installation of Quartz
Tube Element
1. Remove terminal cover at each of fixture to gain access to
terminal blocks. Loosen #10 hex nut and install element as
shown in Figure 8.
Installation of Metal
Sheath Element
1. Remove terminal cover at each end of fixture to gain
access to terminal blocks. Loosen #10 hex nut, then attach
one end of element as shown in Figure 8. With one end of
element attached to terminal, slide insulator over metal
sheath element and attach opposite end of element.
Complete assembly as shown in Figure 9 using bracket
with one mounting hole (discard brackets with 2 mounting
holes).
#10
Screws
Metal
Sheath
Elements
(2 req’d)
1215-2174-000 Bracket
(2 required) 10-32x1/2” Screw
(2 required)
Washer (2 required)
10-32 Nut (2 required)
2900-0025-000 Insulator
(2 required)
Figure 9
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one
year from date of installation, except metal sheath elements which are warranted against defects in workmanship and materials
for five years and quartz tube / quartz lamps for two years from date of installation. This warranty does not apply to damage from
accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment
improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must
be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and ship-
ping costs incurred to return products to Marley Engineered Products Service Center.Within the limitations of this warranty, inop-
erative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service
Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such
repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID
EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGI-
NEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PROD-
UCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-
4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both avail-
able from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the products.
Part No. 5200-2396-001 02/07
ECR 36934
EXCESS ELEMENT LEAD WIRES COULD COME IN CONTACT
WITH THE HEATER ENCLOSURE AND CREATE A SHOCK OR FIRE
HAZARD. CUT OFF ALL EXCESS LEAD MATERIAL.
WARNING
DO NOT HANDLE QUARTZ LAMP OR QUARTZ TUBE HEATING
ELEMENTS WITH BARE HANDS AS SALT IN PERSPIRATION MAY
DETERIORATE THE QUARTZ.
CAUTION
4
!
!
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts 1-800-642-4328
2. Purchase Replacement Parts 1-800-654-3545
3. General Product Information www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description