Qmark CWH1000 Series - Small Room Fan-Forced Wall Heaters User Manual
Whb1000 series, Save these instructions, Installation, operation & maintenance instructions
WHB1000 Series
Fan Forced Wall Heaters
WHENUSINGELECTRICAPPLIANCES,BASIC
PRECAUTIONSSHOULDALWAYSBEFOLLOWEDTO
REDUCETHERISKOFFIRE,ELECTRICSHOCK,AND
INJURYTOPERSONS,INCLUDINGTHEFOLLOWING:
1. Readallinstructionsbeforeinstallingorusingthisheater.
2. This heater is hot when in use.To avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials,
suchasfurniture,pillows,bedding,papers,clothes,etc.and
curtainsatleast3feet(0.9m)fromthefrontoftheheater.
3. Extremecautionisnecessarywhenanyheaterisusedbyor
near children or invalids and whenever the heater is left
operatingandunattended.
4. Donotoperateanyheaterafteritmalfunctions.Disconnect
power at service panel and have heater inspected by a
reputableelectricianbeforeusing.
5. Donotuseoutdoors.
6. Todisconnectheater,turncontrolstooff,andturnoffpower
toheatercircuitatmaindisconnectpanel.
7. Donotinsertorallowforeignobjectstoenteranyventilation
orexhaustopeningasthismaycauseanelectricshock,fire,
ordamagetotheheater.
8. Topreventapossiblefire,donotblockairintakeorexhaust
inanymanner.
9. Aheaterhashotandarcingorsparkingpartsinside.Donot
useitinareaswheregasoline,paint,orflammableliquids
areusedorstored.
10. Usethisheateronlyasdescribedinthismanual.Anyother
usenotrecommendedbythemanufacturermaycausefire,
electricshock,orinjurytopersons.
11. This heater is provided with a red alarm light that will
illuminate only if the heater has turned off as a result of
overheating. If you see the light on, immediately turn the
heateroffandinspectforanyobjectsonoradjacenttothe
heater that may have blocked the airflow or otherwise
caused high temperatures to have occurred.
DO NOT
OPERATE THE HEATER WITH THE ALARM LIGHT
ILLUMINATING.
12. Thisheaterisintendedforcomfortheatingapplicationsand
notintendedforuseinspecialenvironments.Donotusein
damporwetlocationssuchasmarineorgreenhouseorin
areaswherecorrosiveorchemicalagentsarepresent.
13. When installing, see INSTALLATION INSTRUCTIONS for
additionalwarningsandprecautions.
14. For safe and efficient operation, and to extend the life of
yourheater,keepyourheaterclean-SeeMAINTENANCE
INSTRUCTIONS.
SAVE THESE INSTRUCTIONS
!
Installation, Operation & Maintenance Instructions
WARNING
IMPORTANT INSTRUCTIONS
PPD41511
09/14
5200-11213-000
Conforms to ANSI/UL2021
and CSA C22.2, No. 56
Conforms to ANSI/UL2021
and CSA C22.2, No. 56
Specifications
Accessories
Wire
Model
Volts
Amps
Watts
BTU/HR
Size
WHB1101FC
120
8.4/4.2
1000/500
3413/1706
14AWG
WHB1151FC
120
12.5/6.3
1500/750
5120/2560
12AWG
WHB1201FC
120
15.0/7.5
1800/900
6143/3072
12AWG
WHB1202FC
240
8.4/4.2
2000/1000
6826/3413
14AWG
208
7.3/3.6
1500/750
5120/2560
14AWG
WHB1207FC
277
7.3/3.6
2000/1000
6826/3413
14AWG
240
6.3/3.2
1500/750
5120/2560
14AWG
WHB1157FC
277
5.5/2.75
1500/750
5120/2560
14AWG
240
4.7/2.4
1125/562
3840/1920
14AWG
WHB1208FC
208
9.6/4.8
2000/1000
6826/3413
14AWG
ASMW
SurfaceMountingFrame(Accessory)Order
Separately12-1/2”(318mm)HX10-3/8”
(264mm)WX4”(102mm)
AS1W
1”(25mm)RecessMountingFrame(Accessory)
OrderSeparately
AS2W
2”(50mm)RecessMountingFrame(Accessory)
OrderSeparately
11”
(279mm)
4”
(102mm)
10-5/8”
(270mm)
12-1/8”
(307mm)
9-1/4”
(235mm)
7/8”
(22mm)
11”
(279mm)
4”
(102mm)
10-5/8”
(270mm)
12-1/8”
(307mm)
9-1/4”
(235mm)
7/8”
(22mm)