Dell XPS 600 - Manual (Page 71)

Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
system board.
4. Remove the battery by prying it out of its socket with your fingers.
5. Insert the new battery (CR2032) into the socket with the side labeled "+" against the metal clip, and press the battery
into place.
6. Close the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into your
computer.
7. Connect your computer and devices to electrical outlets, and turn them on.
8. Enter the system setup program and restore the settings you recorded in step 1.
9. Properly dispose of the old battery. See the Product Information Guide for battery disposal information.
Back to Contents Page