Removing and installing parts, Memory, With your computer (see – Dell XPS 600 User Manual
Page 24
Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
Removing and Installing Parts
Dell™ XPS™ 600 Service Manual
Memory
You can increase your computer memory by installing memory modules on the system board.
Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see
the technical specifications for memory.
DDR2 Memory Overview
DDR2 memory modules should be installed in pairs of matched memory size and speed. If the DDR2 memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.
See the label in the upper-right corner of the module to determine the module's capacity.
NOTE:
The module's capacity label can also be seen in the upper-left corner of the module.
NOTE:
Always install DDR2 memory modules in the order indicated on the system board.
The recommended memory configurations are:
A pair of matched memory modules installed in DIMM connectors 1 and 2
or
A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in
DIMM connectors 3 and 4
NOTICE:
Do not install ECC memory modules.