Dell XPS 600 - Manual (Page 66)

Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
4. Close the computer cover halfway and pull the front panel away from the computer.
Front LED Board
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from
your body before you touch any of your computer's electronic components. You can do so by touching an
unpainted metal surface on the computer chassis.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Removing the Front LED Board
1. Follow the procedures in " Before You Begin ."
2. Remove the front panel .
3. Disconnect the LED cable from the system board.
4. Remove the screw.
5. Gently move the board upward, tilt the top of the board away from the case to release it from the three front LED board
guides, and then draw the board away from the case.