Dell XPS 600 - Manual (Page 40)

Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
2. Connect the network cable to the add-in network adapter connectors. Do not connect the network cable to the
integrated connector on the back panel.
If you removed an add-in network connector:
1. Enter system setup, select Integrated NIC Controller, and then change the setting to On.
2. Connect the network cable to the integrated connector on the back panel of the computer.
Drives
Your computer supports a combination of these devices:
Up to three hard drives
One floppy drive
Up to two CD or DVD drives
Media Card Reader (optional)
1 media card reader (optional)
2 CD/DVD drive(s)
3 hard drive(s)
General Installation Guidelines