Reinstall the processor (see, Processor, Installing the processor airflow shroud – Dell XPS 600 User Manual
Page 57: Removing the processor
Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
1 anchor tabs (3)
2 shroud release levers (2)
Installing the Processor Airflow Shroud
1. Reconnect the cooling fan power cable to the FANREAR connector (see "
") on the system
board.
2. Reconnect the CPU fan power cable to the FANCPU connector (see "
") on the system board.
3. Align the anchor tabs with the securing slots.
4. Gently press the shroud until the anchor tabs snap securely into place.
5. Close the computer cover.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into your
computer.
6. Connect your computer and devices to electrical outlets, and turn them on.
Processor
Removing the Processor