Dell XPS 600 - Manual (Page 44)

Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
1 power cable
2 hard-drive cable
3 tab (2)
4 hard drive
5 system board connector
5. Connect a power cable to the drive.
6. Connect the hard-drive cable to the drive and to the system board.
7. Check all connectors to be certain that they are properly cabled and firmly seated.
NOTICE: When replacing the hard-drive shroud, ensure that all the cables are properly routed.
8. Insert the bottom tabs of the shroud in to the holes on the drive cage and rotate the shroud up.
9. Press in on the top tabs and lock them in to place.
10. Gently press on the shroud to ensure that it is secure.