Installing a media card reader – Dell XPS 600 User Manual
Page 51
Removing and Installing Parts: Dell XPS 600 Service Manual
parts0.htm[4/10/2014 9:50:52 PM]
1 internal USB cable
2 tabs (2)
3 media card reader*
4 FLEX connector
4.
Installing a Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.
1. Follow the procedures in "
."
2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3. Remove the media card reader and bracket from its packaging.
4. Attach the adapter rails to the adapter by aligning the screw holes on the adapter with the screw holes on the rails and
then inserting and tightening all four screws (two on each rail).