Dell POWEREDGE M1000E - Manual (Page 43)

2-23
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide
OL-13269-01
Chapter 2 Switch Installation
Installing Devices in the 10-Gigabit Ethernet Slots
Caution Verify the correct orientation of your module before inserting it into the slot. Incorrect insertion can
damage the module.
Step 4 Slide the transceiver or converter module into the opening until the back of its faceplate is flush with the
switch module faceplate.
Figure 2-12 Installing X2 Transceiver Modules
Caution Do not install the converter module with SFP modules or cables installed. Always remove any cables and
modules before installing the converter module in the slot.
250309
STK B
A
17X
18X
19X
20X
X2-1
21
22
X2-2
23
24