Dell POWEREDGE M1000E - Manual (Page 12)

1-2
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide
OL-13269-01
Chapter 1 Product Overview
Switch Features Overview
For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on
installing, removing, and connecting to SFP modules, see the documentation that came with the
SFP module.
Figure 1-1 shows the Cisco Catalyst Blade Switch 3130 for Dell. The Cisco Catalyst Blade Switch 3032
for Dell does not have the StackWise Plus ports and Stack, Master, and Member LEDs.
Figure 1-1 CBS3130 Switch Front Panel
Table 1-1 describes the switch ports.
1 Switch 8 Release latch
2 StackWise Plus ports 1 and 2 (only the CBS3130G-S and
CBS3130X-S switches) 9 Cisco status LEDs
3 Gigabit Ethernet uplink ports 17 to 20 and port LEDs 10 System Status/ID LED 1
1. SYST, STCK, MSTR, MMBR.
4 LEDs for ports 21 and 22 or for 10-Gigabit Ethernet slot 1 11 Mode button
5 Gigabit Ethernet ports 21 and 22 or 10-Gigabit Ethernet slot 1 2
2. 10-Gigabit Ethernet supported only on the CBS3130X-S.
12 Console port
6 LEDs for ports 23 and 24 or for 10-Gigabit Ethernet slot 2 13 Power LED
7 10-Gigabit Ethernet slot 2
or Gigabit Ethernet ports 23 and 24
STK
2
1 17X
18X
19X
20X
X2-1 21
22 X2-2 23
24
WS-CBS3130X-S
M M B R
CONSOLE
MODE M S T R
S T C K
S Y S T
250198
1
13
9
11
12
8
6
4
7
5
2
3
10
Table 1-1 Cisco Catalyst Blade Switch 3130 for Dell and 3032 for Dell
Port Descriptions
Port Description
Ports 1 to 16 Internal Gigabit Ethernet 1000BASE-X downlink ports that connect the switch
to the server chassis blades.
Ports 17 to 20 External 10/100/1000BASE-T copper Gigabit Ethernet uplink ports that support
auto-MDIX and autonegotiation.
Ports 21 to 24 10-Gigabit Ethernet module slots for use with the Cisco TwinGig Converter
Modules and Cisco X2 transceiver modules.