Dell Inspiron 531s (Mid 2007) - Manual (Page 119)

Removing and Installing Parts
119
10 Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
11 Fix the support bracket and then press down the card retention bracket to
seat it on its slot ensuring that:
• The guide clamp is aligned with the guide notch.
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the
alignment guide.
1 PCI Express x16 card 2 securing tab 3 PCI Express x1
card
4 PCI Express x1 card
slot 5 PCI Express x16 card
slot
1
5
3
4
2
book.book Page 119 Wednesday, April 16, 2008 3:33 PM