Dell POWEREDGE M1000E - Manual (Page 23)

Access Gateway Administrator’s Guide 3
53-1002743-01
Fabric OS features in Access Gateway mode
1
FIGURE 2 Switch function in Access Gateway mode
Fabric OS features in Access Gateway mode
Table 1 lists Fabric OS components that are supported on a switch when AG mode is enabled.
“Yes” indicates that the feature is supported in Access Gateway mode. “No” indicates that the
feature is not provided in AG mode. “NA” indicates the feature is not applicable in Access Gateway
mode. A single asterisk (*) indicates the feature is transparent to AG; that is, AG forwards the
request to the Enterprise fabric. Two asterisks (**) indicates that the feature may not be available if
the Enterprise fabric is not a Brocade fabric. For more information on these features, refer to the
Fabric OS Administrator's Guide and Fabric OS Command Reference.
TABLE 1 Fabric OS components supported on Access Gateway
Feature Support
Access Control 1 Yes (limited roles)
Adaptive Networking Yes
Admin Domains No
Audit Yes
Beaconing Yes
Bottleneck Detection Yes