Dell Inspiron 6400 - Manual (Page 120)

120
Adding and Replacing Parts
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before
you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 109.
2 Open the display.
3 Remove the hinge cover. See "Hinge Cover" on page 118.
4 Remove the keyboard:
a Remove the two screws at the top of the keyboard.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful
when removing and handling the keyboard.
b Lift the keyboard only enough to hold it up and slightly forward to allow access to the keyboard
connector.
c To release the keyboard cable from the keyboard connector on the system board, rotate the plastic
bar on the keyboard connector to the front of the computer.
1 screws (2) 2 keyboard cable 3 plastic bar on keyboard
connector
4 tabs 5 keyboard
1
3
5
2
4
book.book Page 120 Friday, June 29, 2007 4:59 PM