Touch pad and track stick, Power management, Speaker functions – Dell Latitude D620 ATG User Manual
Page 52: Microsoft® windows® logo key functions
Power Management
Speaker Functions
Microsoft® Windows® Logo Key Functions
To adjust keyboard operation, such as the character repeat rate, open the Control Panel, click Printers and Other Hardware, and click Keyboard. For
information about the Control Panel, see the Windows Help and Support Center. To access the Help and Support Center, see
Windows Help and Support
Center
.
Touch Pad and Track Stick
Both the touch pad and the track stick provide the functionality of a mouse; you can use them to move the cursor on the display. Use the touch pad buttons
and the track stick buttons as you would use the buttons on a mouse. Both sets of buttons work for both the track stick and the touch pad.
The touch pad detects the pressure and movement of your finger as follows to allow you to move the cursor on the display:
l
To move the cursor, lightly slide your finger over the touch pad.
key
Decreases brightness on the integrated display only (not on an external monitor).
Advanced tab in the Power Options Properties window.
Puts the computer into hibernate mode if you have used QuickSet to set up this keyboard shortcut. Dell QuickSet is required (see
Dell™
QuickSet Features
).
Enables and disables the integrated speakers and external speakers, if attached
Windows logo key and
Windows logo key and
Restores all minimized windows. This key combination functions as a toggle to restore minimized windows following the use of
the Windows logo key and
Windows logo key and
Windows logo key and
Opens the Run dialog box
Windows logo key and
Opens the Search Results dialog box
Windows logo key and
Opens the Search Results-Computer dialog box (if the computer is connected to a network)
Windows logo key and
Opens the System Properties dialog box
1
touch pad buttons/track stick buttons
2
track stick
3
touch pad
NOTE:
The fingerprint reader is optional and may not be installed on your computer. For information on how to activate and use the security
management software that controls the fingerprint reader, see
Security Management Software
.