Dell POWEREDGE M1000E - Manual (Page 37)

Fabric OS MIB Reference 19
53-1001768-01
Support for Administrative Domains
1
Support for Administrative Domains
Administrative Domains are supported in Fabric OS Version 5.3.0 and later releases. An
Administrative Domain (AD) is a domain within a fabric. Administrative domains can be used to limit
administrator access within a fabric, and to provide service providers with a means to assign
portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD
may also limit access to a configured set of users.
Support for Role-Based Access Control
Role-Based Access Control (RBAC) is supported in Fabric OS Version 5.3.0 and later releases. RBAC
applies a fixed set of roles that address the access control needs of a majority of customers. Each
role is a set of permissions that can be applied to a user that controls the kinds of jobs and tasks
the user can perform on a fabric or fabric element.
Support for IPv6 addressing
IPv6 addressing is supported in Fabric OS Version 5.3.0 and later releases.
Support for Virtual Fabric
Virtual Fabric is supported in Fabric OS Version 6.2.0 and later releases.
snmptraps --send [-trap_name
trap_name] [-ip_address ip_address] --send
Sends one or all SNMP traps to all configured
recipients or to a specified recipient. -trap_name trap_name
Specifies the trap by name. Use snmptraps
--show for a listing of valid traps.
-ip_address ip_address
Specifies the recipient by its IP address. The IP
address must be specified in IPv4 format. IPv6
addresses are currently not supported.
snmptraps --show --show
Displays all configured SNMP traps and MIBs
supported in Fabric OS v6.4.0 and later.
snmptraps --help --help
Displays the command usage.
TABLE 5 Detailed description of the commands (Continued)
Command Operands Arguments