Fcfeop group, Fcfxportclass2seqdeliv 1.3.6.1.3.42.2.1.1.5.1.13, Fcfxportclass3seqdeliv 1.3.6.1.3.42.2.1.1.5.1.14 – Dell POWEREDGE M1000E User Manual
Page 124: Fcfxportholdtime 1.3.6.1.3.42.2.1.1.5.1.15, Fcfxportbaudrate 1.3.6.1.3.42.2.1.1.5.1.16, Fcfxportmedium 1.3.6.1.3.42.2.1.1.5.1.17, Fcfxporttxtype 1.3.6.1.3.42.2.1.1.5.1.18, Fcfxportdistance 1.3.6.1.3.42.2.1.1.5.1.19
106
Fabric OS MIB Reference
53-1001768-01
fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13
3
fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13
A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port.
Values
Possible values are:
•
yes (1)
•
no (2)
fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14
A flag indicating whether Class 3 sequential delivery is supported by the Fx_Port.
Values
Possible values are:
•
yes (1)
•
no (2)
fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15
The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if
it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this
parameter.
fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16
The FC-0 baud rate of the Fx_Port.
The Brocade 12000, 24000, 48000, and DCX directors do not support this MIB variable.
fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17
The FC-0 medium of the Fx_Port.
fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18
The FC-0 transmitter type of the Fx_Port.
fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19
The FC-0 distance range of the Fx_Port transmitter.
fcFeOp group
This group consists of tables that contain operational status and established service parameters
for the fabric element and the attached Nx_Ports.