Dell POWEREDGE M1000E User Manual
Page 172
154
Fabric OS MIB Reference
53-1001768-01
sw Traps
5
•
swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7
•
swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8
•
swFabricReconfigTrap 1.3.6.1.4.1.1588.2.1.1.1.0.9
•
swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10
•
swExtTrap 1.3.6.1.4.1.1588.2.1.1.1.0.11
for the eleven traps defined in the SW-MIB, when it occurs, and how to configure
the trap, if possible.
TABLE 14
SW-MIB traps
Name
Specific
When
Configure
“swFault
1.3.6.1.4.1.1588.2.1.1.1.0.1”
page 155
(not supported)
1
Obsolete
N.A.
“swSensorScn
1.3.6.1.4.1.1588.2.1.1.1.0.2”
2
Obsolete
N.A.
“swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3”
3
Port changes state
Always on
“swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4”
4
Switch event
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
“swFabricWatchTrap
1.3.6.1.4.1.1588.2.1.1.1.0.5”
5
Threshold reached
Fabric OS Command: fwConfigure
portthconfig, thconfig, sysmonitor --config
“swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1.0.6”
6
Log in/log out
Fabric OS Command: trackChangesSet and
trackChangesShow
“swIPv6ChangeTrap
1.3.6.1.4.1.1588.2.1.1.1.0.7”
7
This trap is generated when an IPv6
address status change event occurs. It is
generated only when IPv6 stateless state
to deprecation state and not for just
address change notification.
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
“swPmgrEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.8”
8
This trap is generated when:
•
Logical switch is created or deleted.
•
Port is moved between logical
switches.
•
Switch FID changes.
•
Any logical switch is changed to base
switch.
•
VF is enabled or disabled.
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
“swFabricReconfigTrap
1.3.6.1.4.1.1588.2.1.1.1.0.9”
9
The trap to be sent for tracking fabric
reconfiguration.
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.