Dell PowerEdge RAID Controller S100 - Manual (Page 64)

64 Troubleshooting
Warning Messages: Dell Inc. PERC S100 Adapter
or Dell Inc. PERC S300 Adapter
BIOS Screen
The Dell Inc. PERC S100 Controller BIOS screen or Dell Inc. PERC S300
Controller BIOS screen is one of the first screens to appear during your
system’s boot sequence. If the system’s virtual disks were in Normal or Ready
status before a system boot, the boot sequence continues normally to the
Microsoft Windows Server 2008 or Microsoft Windows Server 2003 operating
system.
But, if a virtual disk is in Degraded or Failed status, or if specific options in
the Controller Options field were changed previously at the PERC Virtual
Disk Management utility, the warning messages described in Table 7-3
through Table 7-6 appear during the boot sequence. For other issues, see
Table 7-7.
A5_bk0.book Page 64 Thursday, February 10, 2011 8:34 PM