Dell PowerEdge RAID Controller S100 - Manual (Page 16)

16 Overview
• Microsoft Windows Server 2008 Web Edition (x64)
• Microsoft Windows Server 2008 Web Edition (x86)
• Microsoft Windows Small Business Server 2008
• Microsoft Windows Small Business Server 2008 SP2
• Microsoft Windows Small Business Server 2003 R2 SP2 (x86 or x64)
• Microsoft Windows Small Business Server 2011
• Microsoft Windows Web Server 2008 R2
• Microsoft Windows Web Server 2008 R2 SP1
• Microsoft Windows Server 2003 SP2 (x86 or x64)
• Microsoft Windows
Server 2003 R2 SP2, 32-bit or 64-bit, Standard and
Enterprise Edition
• Microsoft Windows Server 2003 R2 SP2 32-bit Web Edition
• Microsoft Windows Server 2008 SP2, 32-bit or 64-bit, Standard and
Enterprise Edition
NOTE: Microsoft Windows Server 2003 SP1 is not supported.
NOTE: Microsoft Windows Server 2003 R2 is not supported.
NOTE: PERC S100 controllers and PERC S300 controller are not supported
with Windows Hyper-V.
Supported
devices
• PERC S100 adapter: supports Dell-supported SATA-based tape devices
and SATA optical disk devices.
NOTE: The PERC S100 controller supports system boot to a tape using a
Dell RD1000 tape device. Select Continue while in CTRL-R for RD1000 to
remain first in the boot order. The RD1000 option goes to end of the boot
order listing if is selected and you would not be able to
boot to it.
• PERC S300 adapter: does not support tape devices or SATA optical disk
devices.
Table 2-2. Platform Requirements — PERC S100 Controller or PERC S300 Controller
Component Requirements
A5_bk0.book Page 16 Thursday, February 10, 2011 8:34 PM