Dell PowerEdge SC1435 - Manual (Page 10)

10
About Your System
• Updates are sometimes included with the system to describe changes to the system, software, and/or
documentation.
NOTE:
Always check for updates on support.dell.com and read the updates first because they often
supersede information in other documents.
• Release notes or readme files may be included to provide last-minute updates to the system or
documentation or advanced technical reference material intended for experienced users or
technicians.
Accessing System Features During Startup
Table 1-1 describes keystrokes that may be entered during startup to access system features. If your
operating system begins to load before you enter the keystroke, allow the system to finish booting, and
then restart your system and try again.
Table 1-1. Keystrokes for Accessing System Features
Keystroke Description
Enters the System Setup program. See "Using the System Setup Program" on page 23.
Enters the System Diagnostics program. See "Running the System Diagnostics" on page 86.
Enters the boot mode selections screen, allowing you to choose a boot device.
Exits PXE boot.
Enters the Baseboard Management Controller (BMC) Setup Module, which allows access to the
system event log (SEL). See the
BMC User’s Guide for more information on setup and use of BMC.
Enters the SAS Configuration Utility. See your optional SAS adapter User’s Guide for more
information.
Option is displayed only if you have PXE support enabled through the System Setup Program (see
"Integrated Devices Screen" on page 28). This keystroke allows you to configure NIC settings for
PXE boot. For more information, see the documentation for your integrated NIC.