Dell XPS One 2710 (Mid 2012) - Manual (Page 87)

Removing the Trim Cover | 87
38 Removing the Trim Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Using a plastic scribe, press-in on the tabs to release the trim cover from the
inner frame.
2 Slide the trim cover toward the top of the computer and then lift the trim cover
off the computer base.
1 tabs (2) 2 trim cover
1
2
OM_Book.book Page 87 Friday, April 27, 2012 3:23 PM