Postrequisites – Dell XPS One 2710 (Mid 2012) User Manual
Page 132
132
| Replacing
the
Middle
Cover
Postrequisites
1
Replace the side I/O-board. See "Replacing the Side-I/O Board" on page 125.
2
Follow step 1 to step 3 in "Replacing the System Board" on page 113.
3
Replace the converter board. See "Replacing the Converter Board" on page 25.
4
Replace the power-supply unit. See "Replacing the Power-Supply Unit" on page 37.
5
Replace the power-supply fan. See "Replacing the Power-Supply Fan" on page 61.
6
Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"
on page 77.
7
Replace the processor heat-sink. See "Replacing the Processor Heat-Sink" on
page 81.
8
Follow step 3 to step 7 in "Replacing the I/O Board" on page 101.
9
Replace the inner frame. See "Replacing the Inner Frame" on page 97.
10
Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
11
Replace the I/O panel. See "Replacing the I/O Panel" on page 93.
12
Replace the trim cover. See "Replacing the Trim Cover" on page 89.
13
Follow step 2 to step 4 in "Replacing the Optical Drive" on page 29.
14
Replace the hard-drive cage. See"Replacing the Hard-Drive Cage" on page 57.
15
Follow step 2 to step 3 in "Replacing the Hard Drive" on page 53.
16
Replace the stand. See "Replacing the Stand" on page 49.
17
Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 132 Friday, April 27, 2012 3:23 PM