Dell XPS One 2710 (Mid 2012) - Manual (Page 134)

134 | Removing the Display Panel
6 Remove the plastic shield and remove the display-power, LVDS, and touchscreen
cables from their routing guides.
7 Disconnect the display-backlight cable from the display assembly.
8 Remove the screw that secures the grounding cable to the processor cooling vents.
9 Remove the screw that secures the grounding cable from the right-speaker mesh
to the middle cover.
10 Remove the screws that secure the system board to the side I/O-board.
1 LVDS cable 2 display-power cable
3 touchscreen cable 4 camera cable
5 infrared-module cable 6 wireless mini-card
7 wireless-antenna cables (2) 8 volume/display-settings controls cable
1 2
3
4
5
6
7
8
OM_Book.book Page 134 Friday, April 27, 2012 3:23 PM