Replacing the speakers, Procedure, Postrequisites – Dell XPS One 2710 (Mid 2012) User Manual
Page 117
Replacing
the
Speakers |
117
53
Replacing the Speakers
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Align the screws holes on the speakers with the screw holes on the computer base.
2
Replace the screws that secure the speakers to the computer base.
3
Route the speaker cable through the routing guides and connect the speaker
cable to the system board.
Postrequisites
1
Replace the inner frame. See "Replacing the Inner Frame" on page 97.
2
Replace the trim cover. See "Replacing the Trim Cover" on page 89.
3
Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
4
Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 117 Friday, April 27, 2012 3:23 PM