Dell XPS One 2710 (Mid 2012) - Manual (Page 142)

142 | Removing the Camera Module
Procedure
1 Remove the screws that secure the camera assembly to the computer base.
2 Gently lift the camera assembly and disconnect the camera cable from the
camera assembly.
3 Loosen the captive screw that secures the camera module and the grounding cable
to the camera assembly.
4 Slide the camera module out of the camera bracket.
1 screws (2) 2 camera assembly
3 camera cable
1 camera module 2 camera bracket
3 captive screw 4 grouding cable
1
2 3
1 2 3 4
OM_Book.book Page 142 Friday, April 27, 2012 3:23 PM