Dell B1265dnf Mono Laser Printer MFP - Manual (Page 49)

Basic printing
49 2. Menu overview and basic setup
Setting Eco mode on the control panel
• The settings set from the machine’s driver override the settings on the
control panel.
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 25).
• It may be necessary to press OK to navigate to lower-level menus.
1 Select (Menu) > System Setup > Machine Setup > Eco Settings on
the control panel.
2 Select the option you want and press OK.
• Default Mode: Select this to turn on or off the eco mode. (Duplex
(long edge)/Toner save/2-up/Skip blank pages)
- Off: Set the eco mode off.
- On: Set the eco mode on.
If you set the eco mode on with a password from the Embedded Web
Service (Settings tab > Machine Settings > System > Eco > Settings), the
On force message appears. You have to enter the password to change the
eco mode status.
• Change Template: Follow the settings from Embedded Web
Service. Before you select this item, you must set the eco function in
Embedded Web Service> Settings tab > Machine Settings >
System > Eco > Settings.
3 Press OK to save the selection.
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see the eco image ( ), that
means the eco mode is currently enabled.
Eco options
• Printer Default: Follows the settings from the machine's control panel.
• None: Disables Eco mode.
• Eco Printing: Enables eco mode. Activate the various Eco items you want to
use.
• Password: If the administrator has enabled Eco mode, you have to
enter the password to change the status.