Dell Precision T3400 (Late 2007) - Manual (Page 81)

System Setup
81
System Setup
Use System Setup as follows:
• To change the system configuration information after you add, change, or
remove any hardware in your computer
• To set or change a user-selectable option such as the user password
• To read the current amount of memory or set the type of hard drive
installed
Before you use System Setup, it is recommended that you write down the
System Setup screen information for future reference.
NOTICE:
Do not change the settings in System Setup unless you are an expert
computer user. Certain changes can cause your computer to work incorrectly.
Entering System Setup
1 Turn on (or restart) your computer.
2 When the DELL logo appears, press immediately.
NOTE:
Keyboard failure may result when a key on the keyboard is held down
for extended periods of time. To avoid possible keyboard failure, press and
release in even intervals until the System Setup screen appears.
If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft
®
Windows
®
desktop, then shut down
your computer and try again.
System Setup Screens
The System Setup screen displays current or changeable configuration
information for your computer. Information on the screen is divided into
three areas: the options list, the active options field, and key functions.