beautypg.com

Replacing the computer cover, Replacing the computer cover" on, See "replacing the computer cover" on – Dell Precision T3400 (Late 2007) User Manual

Page 262

background image

262

Adding and Replacing Parts

Replacing the Computer Cover

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from

the electrical outlet before opening the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge

static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer.

1 Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught
underneath the drives.

2 Ensure that no tools or extra parts are left inside the computer.
3 Replace the cover:

a

Align the computer cover with the tabs on the side of the computer
that has the hard drive bays.

b

Pivot the cover down and gently press the cover until it clicks into
place.

c

Ensure that the cover is locked. If not, repeat all of step 3.

NOTICE:

To connect a network cable, first plug the cable into the network port or

device and then plug it into the computer.

4 Connect your computer and devices to electrical outlets, and turn

them on.