Dell P703w All In One Photo Printer User Manual
Page 52
![background image](/manuals/619885/52/background.png)
freely.
button
to continue.
Dell paper not recognized.
The Dell paper loaded needs a later version of firmware.
Upgrade your printer's firmware.
Proofsheet no longer valid.
The device used to print the proofsheet was removed. A new session
number is assigned each time a Proofsheet is printed. When the
printer scans the Proofsheet it must match the current session
number.
Print a new proofsheet.
Print Messages
Message
Cause
Action/Solution
Printhead missing or not installed
correctly.
The printer has detected that a Printhead is not installed.
Install the printhead.
Printer requires calibration.
The printer has detected that you have installed a new Printhead and
now it must be calibrated.
Press the Start button
to continue.
Calibration unsuccessful
Calibration sheet not inserted correctly.
Check calibration sheet placement and press the
Select
button to continue.
Cannot read calibration sheet.
The printer detected a calibration sheet, but can not read it.
Press the Select
button.
Some photos may not be visible.
Maximum number of photos
exceeded.
A device was attached that contained more than the supported
maximum of 1000 images. Memory Card or Digital Camera, USB
Thumbdrive.
None.
Ink overflow container is full.
Press the Select
button to continue.
Printer error. Print job unsuccessful.
The printer failed to finish printing a swath successfully.
Press the Select
button.
There was an error reading the
tagged pictures on your input
device.
There is a DPOF file on the card which user has requested to be used
but the file is unusable. Cannot read the file, formatting of the data is
not readable, or file could be corrupt.
None.
Rear Access Door Message
Message
Cause
Action/Solution
Replace the rear access door.
The Rear Access Door on the back of the printer is off or not properly
installed.
Install the Rear Access door.
Print job stopped.
During printing the printer detected that the Rear Access Door is
latched.
Unlatch the Rear Access door.
Scanner Base Unit Message
Message
Cause
Action/Solution
Scanner base unit is open.
The scanner base unit on the top of the printer is open while printing. Close the scanner base unit.
Scanner Message
Message
Cause
Action/Solution
Scan operation failed. Please try
again.
Scan operation initiated from the printer fails to communicate with
the computer within a timeout period. The computer was supposed to
start the scan operation.
Retry the scan operation.
Bluetooth Message
Message
Cause
Action/Solution
Bluetooth connection lost.
Bluetooth communication/connection dropped while downloading a file
to the printer.
Check the connection and resend.