Dell P703w All In One Photo Printer - Manual (Page 58)

NOTE: When you connect a PictBridge camera to your printer, then all the functions from operator panel
buttons become unavailable. The printer gets into PictBridge mode and waits for the camera to send pictures
that should be printed. Operator panel buttons become available after you disconnect the PictBridge camera
from your printer.
3. Turn on your digital camera.
The printer automatically enters PictBridge mode.
4. See the instructions included with your camera to begin printing photos.
NOTE: For many digital cameras, there are two USB mode selections, computer and printer (or PTP). For
PictBridge printing, the printer (or PTP) USB selection should be used. For more information, see the
documentation that shipped with your camera.
NOTICE: Do not remove the PictBridge-enabled device or touch the printer near the area of the memory card or
PictBridge-enabled device while actively printing from PictBridge. Data corruption can occur.
Printing From a Bluetooth®-Enabled Device
Bluetooth is a short-range radio technology that enables wireless connectivity between electronic devices.
Range
The recommended maximum distance between Bluetooth devices for the highest transfer speed is 10 meters or 32.81
feet.
Printing
1. Insert your Kodak Bluetooth Adapter into the Pictbridge connector.
Wait until the LED in the Bluetooth Adapter turns on.
2. Discover your printer on your Bluetooth®-enabled device.
Your printer supports the following types of Bluetooth enabled devices:
Mobile camera phones
PDAs
Digital still cameras
3. Select your printer.
4. After Bluetooth connection is established, send a file to your printer using Bluetooth.